New Mexico Register / Volume XXXIV,
Issue 10 / May 31, 2023
TITLE
16 OCCUPATIONAL AND
PROFESSIONAL LICENSING
CHAPTER
5 DENTISTRY (DENTISTS, DENTAL
HYGIENISTS, ETC.)
PART
42 EXPANDED FUNCTION DENTAL
AUXILIARY, REQUIREMENTS FOR CERTIFICATION
16.5.42.1 ISSUING AGENCY: New Mexico Board of Dental Health Care.
[16.5.42.1
NMAC - Rp, 16.5.42.1 NMAC, 5/31/2023]
16.5.42.2 SCOPE: The provisions of Part 42 of Chapter 5
apply to all applicants for certification; to active, expired and suspended
certificate holders; and to anyone who requests a list of certified expanded
function dental auxiliary or other public records.
[16.5.42.2
NMAC - Rp, 16.5.42.2 NMAC, 5/31/2023]
16.5.42.3 STATUTORY AUTHORITY: Part 42 of Chapter 5 is promulgated pursuant
to the Dental Health Care Act, Section 61-5A-5, 61-5A-6 and 61-5A-6.1 NMSA
1978.
[16.5.42.3
NMAC - Rp, 16.5.42.3 NMAC, 5/31/2023]
16.5.42.4 DURATION: Permanent.
[16.5.42.4
NMAC - Rp, 16.5.42.4 NMAC, 5/31/2023]
16.5.42.5 EFFECTIVE DATE: May 31, 2023, unless a later date is cited
at the end of a section.
[16.5.42.5
NMAC - Rp, 16.5.42.5 NMAC, 5/31/2023]
16.5.42.6 OBJECTIVE: To establish the requirements for
certification for expanded function dental auxiliary to perform expanded functions.
These rules address applicants being
certified via the following tracks.
A. Completed an expanded function dental auxiliary
program at an institution where the dental assisting program is accredited by
the joint commission on dental accreditation (CODA).
B. Independent preparation for dental assistants that
have five years’ experience and prepare independently for the requirements.
C. Candidates who possess a current certificate in good standing
in expanded function dental auxiliary from another state or jurisdiction
(credentials).
[16.5.42.6
NMAC - Rp, 16.5.42.6 NMAC, 5/31/2023]
16.5.42.7 DEFINITIONS:
A. “Apprenticeship”
means a period of time in which an EFDA candidate is
closely supervised by a supervising dentist and demonstrates competency on
patients in EFDA duties as defined under 16.5.46.9 NMAC. The supervising dentist assumes all
responsibility and liability for the training and actions of an EFDA candidate
and must attest to their competency.
B. “Close
personal supervision” means a New Mexico licensed dentist directly
observes, instructs and certifies in writing the training and expertise of a
EFDA candidate to the board.
C. “Continuous
employment” means 1,000 hours per year for any five consecutive years.
D. “Direct
supervision” means the process under which an act is performed when a
dentist licensed pursuant to the Dental Health Care Act:
(1) is physically present throughout
the performance of the act;
(2) orders, controls and accepts full
professional responsibility for the act performed; and
(3) evaluates and approves the
procedure performed before the patient departs the care setting.
E. “Expanded
function dental auxiliary” EFDA means a dental assistant, dental hygienist
or other dental auxiliary that has received education specific to the duties
delineated by the board for an EFDA, and has met the educational and certifying
exam standards set by the board for an EFDA, and works under the direct
supervision of a NM licensed dentist to perform the functions allowed under
this section.
F. “Placing and
shaping restorations” means the act of placing dental filling material(s)
directly into a cavity preparation previously prepared by a dentist, and
shaping, finishing and polishing the restoration so that it has proper occlusal
form, contacts, anatomy and margins prior to final approval by the dentist.
G. “Supervising
dentist” means a New Mexico licensed dentist who has no current action or
inquires pending by the board and who provides supervision, instruction and
recommendation for an EFDA candidate to the board.
[16.5.42.7
NMAC - Rp, 16.5.42.7 NMAC, 5/31/2023]
16.5.42.8 REQUIREMENTS: EFDA who performs the duties
defined under 16.5.46.9 NMAC are required to be certified by the board.
[16.5.42.8
NMAC - Rp, 16.5.42.8 NMAC, 5/31/2023]
16.5.42.9 EDUCATION AND EXAMINATION
REQUIREMENTS FOR EXPANDED FUNCTION DENTAL AUXILIARY:
A. satisfactory completion of an expanded function
dental auxiliary course at an institution where the dental assisting program is
accredited by the joint commission on dental accreditation, and approved by the
board. The applicant must be certified
in all four expanded functions as defined in 16.5.33 NMAC; or
B. for dental auxiliaries that have five years’
experience and “independent preparation” for the requirements:
(1) applicant must have a minimum of
five years of continuous employment as a dental assistant or dental hygienist
with a minimum of 1,000 hours per year;
(2) achieved certification in all expanded
functions as defined in 16.5.33 NMAC;
(3) taken a course of study in dental
anatomy, dental materials, placing and shaping direct restorations, fitting and
shaping of stainless steel crowns, and occlusion function and passed a
post-test approved by the board verifying readiness for taking the
certification examination;
(4) recommended for an expanded
function dental auxiliary (EFDA) certification by the supervising dentist as
defined in Subsection G of 16.5.42.7 NMAC;
(5) instructors must have higher or
same level of licensure or certification in respective courses they are
teaching;
C. pass a clinical examination accepted by the board for
certification of EFDA;
D. completed the jurisprudence examination with a score
of at least seventy five percent;
E. exemptions; an expanded function dental auxiliary who
is certified to perform EFDA duties in another state or jurisdiction with
requirements not less stringent than those in New Mexico may be certified based
on credentials;
F. after passing a board accepted examination or being
certified by credentials, EFDA candidates must complete an apprenticeship under
the close personal supervision of a supervising dentist;
(1) the board will send to the EFDA
candidate upon receipt of the completed application the following:
(a) permit to start apprenticeship to
be displayed during apprenticeship; and
(b) affidavit form to be signed by
supervising dentist at start and completion of apprenticeship;
(2) the affidavit shall state that
the supervising dentist assures that the EFDA candidate is competent in the
procedures allowed by an EFDA and that the supervising dentist assumes full
responsibility and liability for the training and actions of the EFDA;
(3) once the permit is issued by the
board office the EFDA candidate has 180 days to complete the apprenticeship; (a
grace period of no more than 60 days may be granted by the board chair or
vice-chair) and
(4) upon completion of the
apprenticeship the candidate must return the EFDA permit and the signed
affidavit to the board; once the permit and signed affidavit have been received
and verified by the board a certificate for EFDA may be issued.
[16.5.42.9
NMAC - Rp, 16.5.42.9 NMAC, 5/31/2023]
16.5.42.10 REQUIRED DOCUMENTATION: Each applicant for an expanded function
dental auxiliary certification shall submit to the board or its agent the
required fees and the following documentation.
Applications are valid for one year from the date of receipt by the
board; after one year, the applicant shall submit to the board a new
application.
A. Each application for licensure who completed an EFDA
program as defined in Subsection A of 16.5.42.9 NMAC must submit the following
documentation:
(1) completed application;
(2) official transcripts or
certification verifying successful completion of an EFDA program accredited by
the commission on dental accreditation;
(3) copy of clinical examination accepted
by the board for certification as EDFA; the results of the exam are valid in
New Mexico for a period not to exceed five years:
(a) the applicant shall apply
directly to a board approved testing agency for examination;
(b) results of the clinical
examination shall be sent directly to the board office; and
(4) affidavit letter from supervising
dentists.
(5) proof of certifications in all 4
expanded functions as defined in 16.5.33 NMAC no later than July 1, 2019.
B. An applicant who has
not graduated from a program as defined in Subsection A of 16.5.42.9
NMAC can apply for certification if they meet all requirements in Subsection B,
C, D and F of 16.5.42.9 NMAC and must submit the following:
(1) completed application;
(2) shall provide proof of five years
of continuous employment as a dental assistant or dental hygienist with a
minimum of 1,000 hours per year;
(3) shall have achieved certification
in all expanded functions as defined in 16.5.33 NMAC;
(4) shall provide proof of successful
completion of courses in dental anatomy, dental materials, placing and shaping
direct restorations, fitting and shaping of stainless steel crowns, and
occlusion function;
(5) shall provide an affidavit
executed on dentist letterhead from a supervising dentist recommending the
applicant for EFDA certification and verifying the applicant’s competency; and
(6) copy of clinical examination
score card or certificate.
C. Certification by credentials: Applicants can apply
for certification by credentials if they meet all requirements as defined in
Subsections A, C, D and F of 16.5.42.9 NMAC and must submit the following:
(1) completed application;
(2) verification of a current active
certification in good standing from another state; and
(3) copy of clinical examination
score card or certificate; the results of the examination are valid in New
Mexico for a period not to exceed five years:
(a) the applicant shall apply
directly to a board approved testing agency for examination, and
(b) the results of the clinical
examination must be sent directly to the board office; and
(4) affidavit letter from the
supervising dentist of competency.
[16.5.42.10
NMAC - Rp, 16.5.42.10 NMAC, 5/31/2023]
16.5.42.11 CERTIFICATION PROCEDURE: Upon receipt of a completed application,
including all required documentation, signed affidavit and fees, the
secretary-treasurer or delegate of the board will review the application and
determine eligibility for certification.
A. Initial
certificates are issued for a period not to exceed three years.
B. The certificate
must be displayed so that it is visible to the public.
[16.5.42.11
NMAC - Rp, 16.5.42.11 NMAC, 5/31/2023 1/9/2012]
16.5.42.12 TIMELINE FOR PREVIOUSLY ISSUED EFDA
PERMITS AND EXPANDED FUNCTIONS:
All current EFDA certification permit holders must have all four
expanded functions as defined in 16.5.33 NMAC no later than July 1, 2019. EFDA
permits will suspend automatically if such expanded functions certifications
are not current. Once those expanded
functions are certified, the EFDA permit will become valid until its regular
expiration period.
[16.5.42.12
NMAC - Rp, 16.5.42.12 NMAC, 5/31/2023]
HISTORY OF 16.5.42 NMAC:
[RESERVED]
History of
Repealed Material:
16.5.42
NMAC, Expanded Function Dental Auxiliary, Requirements For Certification filed
12/9/2011 Repealed effective 5/31/2023.
Other History:
16.5.42
NMAC, Expanded Function Dental Auxiliary, Requirements For Certification filed
12/9/2011 Replaced by 16.5.42 NMAC, Expanded Function Dental Auxiliary,
Requirements For Certification effective 5/31/2023.