TITLE 17 PUBLIC UTILITIES AND UTILITY
SERVICES
CHAPTER 9 ELECTRIC SERVICES
PART 570 GOVERNING COGENERATION AND SMALL
POWER PRODUCTION
17.9.570.1 ISSUING AGENCY: New Mexico
Public Regulation Commission.
[17.9.570.1 NMAC - Rp, 17.9.570.1 NMAC, 5/24/2022]
17.9.570.2 SCOPE:
A. 17.9.570
NMAC applies to every electric utility (investor-owned, rural electric
cooperative, municipal, or an entity providing wholesale rates and service)
operating within the state of New Mexico that is subject to the jurisdiction of
the New Mexico public regulation commission as provided by law.
B. It
is intended that the obligations of utilities provided for in 17.9.570 NMAC
shall extend to both production and consumption functions of qualifying
facilities irrespective of whether the production and consumption functions are
singly or separately owned. In
situations where the production and consumption functions are separately owned,
the qualifying facility or its operator may elect to enter
into the contract with the utility.
C. All
interconnection contracts between utilities and qualifying facilities existing
at the time 17.9.570 NMAC is adopted shall automatically continue in full force
and effect with no change in rates for the purchase of power from the
qualifying facilities. Any changes made
to the existing interconnection contracts shall be made by mutual agreement and
shall conform to the provisions of 17.9.570 NMAC.
D. Variances
which have been granted by the commission from earlier versions of general
order no. 37 and under 17.9.570 NMAC shall continue in full force and effect
unless the commission specifically rescinds any such variance.
[17.9.570.2 NMAC - Rp, 17.9.570.2 NMAC, 5/24/2022]
17.9.570.3 STATUTORY AUTHORITY: Sections
8-8-15, 62-6-4, 62-6-19, 62-6-24, and 62-8-2 NMSA 1978; 16 USCA Section 2621.
[17.9.570.3 NMAC - Rp, 17.9.570.3 NMAC,
5/24/2022]
17.9.570.4 DURATION: Permanent.
[17.9.570.4 NMAC - Rp, 17.9.570.4 NMAC, 5/24/2022]
17.9.570.5 EFFECTIVE DATE: May 24, 2022,
unless a later date is cited at the end of a section. Applications filed prior to this effective
date shall be governed by the specific orders related to those applications.
[17.9.570.5 NMAC - Rp, 17.9.570.5 NMAC, 5/24/2022]
17.9.570.6 OBJECTIVE:
A. 17.9.570
NMAC is to govern the purchase of power from and sale of power to qualifying
facilities by:
(1) enabling
the development of a market for the power produced by qualifying facilities;
(2) establishing
reasonable and objective criteria to determine when a legally enforceable
obligation arises;
(3) establishing
guidelines for the calculation of utilities' avoided costs, including the
option to use market-based methods to calculate avoided energy and capacity
costs; and
(4) providing
meaningful access to critical cost information from utilities.
B. 17.9.570.14
NMAC is intended to simplify the metering procedures for qualifying facilities
up to and including 10kW and encourage the use of small-scale customer-owned
renewable or alternative energy resources in recognition of the beneficial
effects the development of such resources will have on the environment of New
Mexico.
C. 17.9.570
NMAC is intended to implement regulations of the federal energy regulatory
commission, 18 C.F.R. Section 292, as amended, promulgated pursuant to the
Public Utility Regulatory Policies Act of 1978, Pub. L. No. 95-617, 92 Stat.
3117 (codified as amended starting at 16 U.S.C. Section 824) and the New Mexico
Public Utility Act, Sections 62-3-1 et. seq., NMSA 1978 as amended.
D. The
standards and procedures for the interconnection of generating facilities with
rated capacities up to and including 10 MW are set forth in 17.9.568 NMAC. The standards and procedures for the
interconnection of generating facilities with rated capacities greater than 10
MW are set forth in 17.9.569 NMAC.
[17.9.570.6 NMAC - Rp, 17.9.570.6 NMAC, 5/24/2022]
17.9.570.7 DEFINITIONS: Terms
defined in the Public Utility Regulatory Policies Act of 1978 (PURPA) shall
have the same meaning for purposes of this rule as they have under PURPA,
unless further defined in 18 CFR 292.101.
The following definitions apply for purposes of this rule:
A. Definitions beginning with “A”:
(1) avoided costs means the incremental costs to an electric utility of
electric energy or capacity or both which, but for the purchase from the
qualifying facility or qualifying facilities, such utility would generate
itself or purchase from another source.
Avoided costs shall exclude all costs that the utility would not have
been incurred “but for” the sale by the qualifying facility. Costs that would not have been incurred “but
for” the sale by the qualifying facility shall include, but are not limited to,
settlement adjustment charges and costs associated with additional reserves,
systems operation impacts, and curtailments;
(2) as available power means power that a qualifying facility may sell, but
has no legal obligation to sell, to the utility.
B. Definitions beginning with “B”: back-up power means electric energy or capacity supplied by an
electric utility to replace energy ordinarily generated by a facility's own
generation equipment during an unscheduled outage of the qualifying facility;
C. Definitions
beginning with “C”: commission means New Mexico public regulation commission.
D. Definitions beginning with “D”: design capacity means the total AC nameplate power rating of the
power conversion unit(s) at the point of common coupling.
E. Definitions beginning with “E”: [RESERVED]
F. Definitions beginning with “F”: [RESERVED]
G. Definitions beginning with “G”: [RESERVED]
H. Definitions beginning with “H”: [RESERVED]
I. Definitions beginning with “I”:
(1) interconnection costs means the reasonable costs of
connection, switching, metering, transmission, distribution, safety provisions
and administrative costs incurred by the electric utility directly related to
the installation and maintenance of the physical facilities necessary to permit
interconnected operations with a qualifying facility, to the extent such costs
are in excess of the corresponding costs which the electric utility would have
incurred if it had not engaged in interconnected operations, but instead
generated an equivalent amount of electric energy itself or purchased an
equivalent amount of electric energy or capacity from other sources.
Interconnection costs do not include any costs included in the calculation of
avoided costs;
(2) interruptible power means electric energy or capacity
supplied by an electric utility subject to interruption by the electric utility
under specified conditions.
J. Definitions beginning with “J”: [RESERVED]
K. Definitions beginning with “K”: [RESERVED]
L. Definitions beginning with “L”:
(1) locational marginal price means the price for energy at a particular location as
determined in the western energy imbalance market or in the “SPP energy
markets” which means the real-time energy markets operated by southwest power
pool, inc;
(2) legally enforceable obligation means a public utility’s obligation to purchase
as-available energy from a qualified facility and is created when the criteria
set forth in 17.9.570.9 NMAC are met and refers to the qualifying facility’s
obligation to sell power to a utility for the term of the obligation, and to
the utility’s corresponding obligation to purchase power from the qualifying
facility for the term of the obligation.
M. Definitions beginning with “M”: maintenance
power means electric energy or
capacity supplied by an electric utility during scheduled outages of the
qualifying facility.
N. Definitions beginning with “N”:
(1) net metering means the difference between the energy produced by
the qualifying facility’s generation and the energy that would have otherwise
been supplied by the utility to the qualifying facility absent the qualifying
facility’s generation;
(2) new capacity addition:
(a) new
capacity addition means the capacity added to a utility's resource mix after
the effective date of 17.9.570 NMAC through normal utility resource procurement
activities which shall include but not necessarily be limited to:
(i) construction of or participation
in new generating facilities;
(ii) augmenting
the capacity of or extending the life of existing generating facilities through
capital improvements; or
(iii) entering
into new contracts or exercising options in existing contracts which will
result in additional capacity;
(b) new
capacity addition does not include the following:
(i) renegotiation of existing
contracts for anything other than increasing capacity in the resource mix;
(ii) renegotiation
of existing full power requirements contract between a
distribution cooperative and its full power requirements supplier; and
(iii) seasonal
uprating in capacity achieved without any capital improvements to existing
generating facilities.
O. Definitions beginning with “O”: [RESERVED]
P. Definitions beginning with “P”:
(1) point of common coupling (PCC) means the point where the interconnection facilities
connect with the utility’s system;
(2) power means electric energy or capacity
or both;
(3) power
conversion unit (PCU) means an inverter or AC generator, not including the
energy source;
(4) purchase means the purchase of
electric energy or capacity or both from a qualifying facility by an electric
utility.
Q. Definitions beginning with “Q”:
(1) qualifying facility means a cogeneration facility or a small power
production facility that is a qualifying facility under Subpart B of 18 C.F.R.
Part 292;
(a) A
qualifying facility may include transmission lines and other equipment used for
interconnection purposes (including transformers and switchyard equipment), if:
(i) Such lines and equipment are
used to supply power output to directly and indirectly interconnected electric
utilities, and to end users, including thermal hosts, in accordance with state
law; or
(ii) Such
lines and equipment are used to transmit supplementary, standby, maintenance
and backup power to the qualifying facility, including its thermal host meeting
the criteria set forth in Union Carbide Corporation, 48 FERC 61,130, reh'g
denied, 49 FERC 61,209 (1989), aff'd sub nom., Gulf States Utilities Company v.
FERC, 922 F.2d 873 (D.C. Cir. 1991); or
(iii) If
such lines and equipment are used to transmit power from other qualifying
facilities or to transmit standby, maintenance, supplementary and backup power
to other qualifying facilities.
(b) The
construction and ownership of such lines and equipment shall be subject to any
applicable federal, state, and local siting and environmental requirements.
R. Definitions beginning with “R”: rate means
any price, rate, charge, or classification made, demanded, observed or received
with respect to the sale or purchase of electric energy or capacity, or any
rule, regulation, or practice respecting any such rate, charge, or
classification, and any contract pertaining to the sale or purchase of electric
energy or capacity.
S. Definitions beginning with “S”:
(1) sale means the sale of electric energy
or capacity or both by an electric utility to a qualifying facility;
(2) settlement adjustment charge means the sum of adjustments
to the settlement interval by an energy market, such as the southwest power
pool, to account for market charges or credits applicable to the qualifying
facility resource.
(3) supplementary power means electric energy or capacity supplied by an
electric utility, regularly used by a qualifying facility in addition to that
which the facility generates itself;
(4) system emergency means a condition on a utility's system which is
likely to result in imminent significant disruption of service to customers or
is imminently likely to endanger life or property.
T. Definitions beginning with “T”: tariff
means the document filed by a utility with the commission pursuant to 17.9.570
NMAC containing that utility's rules, rates, services
and forms.
U. Definitions beginning with “U”: utility means a utility or public utility as defined in Section 62-3-3 NMSA
1978 serving electric customers subject to the jurisdiction of the commission.
V. Definitions beginning with “V”: [RESERVED]
W. Definitions beginning with “W”: western energy imbalance market (or western EIM)
means the real-time energy imbalance
market operated by the California independent system operator corporation.
X. Definitions beginning with “X”: [RESERVED]
Y. Definitions beginning with “Y”: [RESERVED]
Z. Definitions beginning with “Z”: [RESERVED]
[17.9.570.7 NMAC - Rp, 17.9.570.7 NMAC, 5/24/2022]
17.9.570.8 [RESERVED]
[17.9.570.8 NMAC - Rp, 17.9.570.8 NMAC, 5/24/2022]
17.9.570.9 OBLIGATION TO PURCHASE:
A. If
a qualifying facility elects to sell power to the utility on an as-available
basis, the utility shall purchase power from the qualifying facility from the
date the qualifying facility begins providing as-available power to the
utility.
B. If
a qualifying facility elects to sell power to the utility in accordance with a
legally enforceable obligation, the legally enforceable obligation arises on
the date that the qualifying facility demonstrates compliance with all of the following prerequisites:
(1) The
qualifying facility has filed an interconnection application with the
appropriate entity and has tendered all required fees to that entity;
(2) The
qualifying facility has taken meaningful steps to obtain site control to
construct the entire qualifying facility, which the qualifying facility may
demonstrate through the production of executed agreements and through similar measures;
(3) The
qualifying facility has applied for all required federal, state, and local
permits and licenses necessary to construct and operate the facility, and has
tendered all required fees to the appropriate governmental authorities;
(4) The
qualifying facility has completed all environmental studies and other actions
necessary to support permit and license applications including but not limited
to acquired and recorded in the appropriate governmental offices all real
property rights necessary to construct and operate the facility, such as real
property leases, rights of way, line locations approvals and easements;
(5) The
qualifying facility has obtained or applied for financing of the proposed
project, as evidenced by loan application documents or other types of financing
applications;
(6) The
qualifying facility has provided the utility with a construction plan and timeline
for the construction of the facility, including construction cost quotes; and
(7) The
qualifying facility has submitted a self-certification to the federal energy
regulatory commission that has not been revoked, has
received an order from the federal energy regulatory commission certifying
qualifying facility status, or has otherwise demonstrated that certification as
a qualifying facility is not required under the Federal Energy Regulatory
Commission’s regulations.
C. After receipt
of a qualifying facility’s request that the utility acknowledge that a legally
enforceable obligation to purchase from the qualifying facility has arisen, the
utility shall provide a response to the qualifying facility within 30 calendar
days. If the utility rejects the
qualifying facility’s request or otherwise fails to acknowledge the request
within 30 calendar days, the qualifying facility may file an application with
the commission seeking a determination that the utility has a legally
enforceable obligation to purchase power from the qualifying facility, with the
date of such obligation to be fixed by the commission.
D. Regardless of
when a legally enforceable obligation arises, the utility’s obligation to begin
paying for power provided under a legally enforceable obligation begins on the
date the qualifying facility begins delivering power to the utility.
E. An electric
utility is obligated to purchase power from a qualifying facility at the
utility's avoided cost, as calculated under 17.9.570.11 NMAC, regardless of
whether the electric utility making such purchase is simultaneously selling
power to the qualifying facility.
F. The qualifying
facility shall give the utility at least 60 days written advance notice to
interconnect. Such notice shall specify the date the qualifying facility will
be ready for interconnection, the date the qualifying facility will be able to
commence testing, and the anticipated date of operation after testing. The qualifying facility shall pay the
estimated costs of interconnection in full at the time the notice to
interconnect is given. The utility shall
pay a qualifying facility for any energy produced during testing of the
qualifying facility at the appropriate energy rate pursuant to Subsection B of
17.9.570.11 NMAC.
G. If the utility
determines that it cannot interconnect the qualifying facility within the time
set in the notice to interconnect because adequate interconnection facilities
are not available, it shall, within 15 business days of receipt of the notice
to interconnect, notify the qualifying facility specifying the reasons it
cannot interconnect as requested by the qualifying facility and specifying the
date interconnection can be made. If the
qualifying facility objects to the date for interconnection specified by the
utility, objects to the utility's determination that adequate interconnection
facilities are not available, or disputes the good
faith efforts of the utility to interconnect, the qualifying facility may
initiate a proceeding before the commission pursuant to the complaint process
of this 17.9.570 NMAC. If the commission
finds that the utility's position on the time for interconnection or
unavailability of interconnection facilities was not justified, the qualifying
facility shall be deemed to have been interconnected and the qualifying
facility shall be deemed to have otherwise complied with its contractual duties
on the 60th day following the notice to interconnect and payments by
the utility to the qualifying facility shall commence at the appropriate power
rate which shall be applied to the amount of imputed or expected power as if
the qualifying facility were producing, provided that the qualifying facility’s
power was available.
[17.9.570.9 NMAC - Rp, 17.9.570.9 NMAC, 5/24/2022]
17.9.570.10 METERING OPTIONS:
A. General.
(1) A
qualifying facility contracting to provide power may displace its own
load. The utility may require
appropriate metering. Billing for any
power from the utility will be at the utility's approved rate applicable to the
service provided to the qualifying facility in accordance with Subsections A-G
of 17.9.570.12 NMAC.
(2) The
tariff filed by each utility pursuant to Subsection H of 17.9.570.13 NMAC shall
include the offer to any qualifying facility that has not contracted to receive
capacity payments, the metering options in Subsections B, C and D of
17.9.570.10 NMAC.
(3) The
options of Subsections B, C and D of 17.9.570.10 NMAC may involve time-of-day
metering if the utility has in effect time-differentiated rates and metering
for the class of customer to which the qualifying facility belongs or if the
parties negotiate time-differentiated payments to the qualifying facility.
B. Load
displacement option. If the qualifying
facility wishes primarily to serve its own load, the utility shall agree to
interconnect with a single meter or meter set measuring flow from the utility
to the qualifying facility; billing for any power from the utility will be at
the utility's approved tariff applicable to the service provided to the
qualifying facility; there will be no additional customer charge and no payment
by the utility for any excess energy which might be generated by the qualifying
facility.
C. Net
metering option.
(1) The
utility shall install the metering necessary to determine the net energy
delivered from the qualifying facility to the utility or from the utility to
the qualifying facility for each time-of-use or single rate period, as
applicable, during a billing period; the net energy delivered to either the
qualifying facility or to the utility is the difference between the energy
produced by the qualifying facility’s generation and the energy that would have
otherwise been supplied by the utility to the qualifying facility absent the
qualifying facility’s generation.
(2) The
net energy delivered from the qualifying facility to the utility shall be
purchased by the utility at the utility's applicable time-of-use or single
period energy rate as described in Subsection B of 17.9.570.11 NMAC; the
qualifying facility shall be billed for the net energy delivered from the
utility in accordance with the tariffs that are applicable to the qualifying
facility absent the qualifying facility’s generation; the qualifying facility
shall also be billed for all demand and other charges in accordance with the
applicable tariffs. At the end of the
billing period the utility shall net all charges owed to the utility by the
qualifying facility and all payments owed by the utility to the qualifying
facility. If a net amount is owed to the
qualifying facility for the billing period, and is less than $50, the payment
amount may be carried over to the following billing period. If a net amount is owed to the qualifying
facility and is $50 or more, the utility shall make payment to the qualifying
facility prior to the end of the next billing period.
(3) If
provision of the net metering option requires metering equipment and related
facilities that are more costly than would otherwise be necessary absent the
requirement for net metering, the qualifying facility shall pay all incremental
costs associated with installing the more costly metering equipment and
facilities. An additional customer
charge to cover the added costs of billing and administration may be included
in the tariff if supported with evidence of need for such charge.
D. Separate
load metering (simultaneous buy/sell) option.
The utility shall install the metering necessary to determine separately:
(1) all the energy produced by the
qualifying facility’s generator; and
(2) all of the
power consumed by the qualifying facility’s loads; the utility shall purchase
all energy produced by the qualifying facility’s generator at the utility’s
applicable time-of-use or single period energy rate as described in Subsection
B of 17.9.570.11 NMAC. The qualifying
facility shall purchase all power consumed at its normally applicable rate; an
additional customer charge to cover the added costs of billing and
administration may be included in the tariff if supported with evidence of need
for such charge.
E. Metering
configurations. Metering configurations
used to implement the provisions of 17.9.570 NMAC shall be reasonable,
nondiscriminatory, and shall not discourage cogeneration or small power
production.
[17.9.570.10 NMAC - Rp, 17.9.570.10 NMAC, 5/24/2022]
17.9.570.11 DETERMINATION OF RATES FOR PURCHASES
FROM QUALIFYING FACILITIES:
A. General: A utility
shall pay a qualifying facility avoided costs for energy or capacity purchased
from the qualifying facility. Avoided
costs are defined in Subsection A of 17.9.570.7 NMAC. The energy rate represents avoided energy
costs for the purposes of 17.9.570 NMAC. The avoided energy or capacity rate determined
as provided herein represents avoided energy or avoided capacity costs for the
purposes of 17.9.570 NMAC.
B. Energy
rate:
(1) Within
one year of the approval of this rule, each utility subject to the commission’s
jurisdiction shall apply for approval of a tariff that specifies a method for
determining avoided energy costs as specified herein to establish the avoided
energy cost rates paid by that utility to qualifying facilities.
(a) A
utility participating in the Western EIM may establish the energy rate to be
paid for power supplied by a qualifying facility by reference to the
appropriate Western EIM locational marginal price determined on an hourly basis
if such locational marginal price is representative of the utility’s avoided
cost. To implement this option for the
avoided cost energy rate, the utility must set forth in its current tariff on
file with the commission the applicable Western EIM pricing location.
(b) A
utility participating in the SPP may establish the energy rate to be paid for
power supplied by a qualifying facility by reference to the appropriate SPP
locational marginal price if such locational marginal price is representative
of the utility’s avoided cost, as defined herein. To implement this option for the avoided cost
energy rate, the utility must set forth in its current tariff on file with the
commission the applicable SPP pricing location.
(c) Any
utility that participates in a market has the flexibility to establish avoided
energy cost rates based on the rule criteria. Any utility that does not participate in the
Western EIM or the SPP may establish avoided energy cost rates based on:
(i) Locational
marginal prices, if any are available;
(ii) Market
hub prices;
(iii) Formulas
based on natural gas prices;
(iv) Competitive
solicitations; or
(v) Mutual
agreement between the qualifying facility and the utility.
(2) In
its application for approval of the tariff, each utility applying for approval
of a method to calculate avoided energy cost rates for purchases shall specify
the method to be used and explain why it results in an accurate approximation
of the utility’s avoided energy costs.
(3) The
avoided energy cost rates calculated in accordance with the method approved
under Paragraph (1) of Subsection B of 17.9.570.11 NMAC shall be applied to
both energy acquired on an as-available basis and energy acquired pursuant to a
legally enforceable obligation.
(4) Until
the commission approves a utility’s tariff under Paragraph (1) of Subsection B
of 17.9.570.11 NMAC, the utility shall pay avoided cost rates calculated under Subsection
C of 17.9.570.11 NMAC for both energy purchased on an as-available basis and
energy purchased pursuant to a legally enforceable obligation. After the approval of the utility’s tariff
under Paragraph (1) of Subsection B of 17.9.570.11 NMAC, the utility shall pay
the avoided cost rates calculated under the approved tariff for both energy
purchased on an as-available basis and energy purchased pursuant to a legally
enforceable obligation.
C. Until
approval of a utility’s tariff under Paragraph (1) of Subsection B 17.9.570.11
NMAC, the avoided cost rate to be paid for the energy supplied by a qualifying
facility in any month shall be that respective month's rate from the utility's
current schedule on file with the commission. Each utility shall file with the commission
its schedule containing monthly energy rates that will be applicable to the
next 12-month period. These monthly
energy rates shall be listed for each voltage level of interconnection and
shall be expressed in cents/kWh. Each
month's energy rate contained in the schedule shall be the average of the
economy energy purchases by the utility for the corresponding month of the
immediately preceding 12-month period. In
the event a utility does not engage in economy energy purchases in any given
month, the energy rate to be included in its schedule for that month shall be
either: the monthly average of hourly incremental energy costs including
variable operation and maintenance expenses for generating utilities, or the
energy charge of the highest energy cost contract as adjusted for appropriate
retail fuel and purchase power pass through for non-generating utilities.
(1) As
applicable, those utilities with retail time-of-use rates on file with the
commission shall file schedules reflecting monthly energy rates calculated for
peak periods only and off-peak periods only which shall be applied to
qualifying facilities whose generation is limited to peak periods only or off-
peak periods only. Peak and off-peak periods shall be as defined in the
utility's retail tariffs on file with the commission.
(2) Within
60 days of the effective date of revised 17.9.570 NMAC each electric utility
subject to the rule shall file with the commission the schedule containing
rates to be offered along with detailed supporting workpapers showing the input
data and calculations, if applicable. After
the first submittal each utility shall update its filing within 30 days from
the last day of its fiscal year.
(3) To the
extent applicable, variable operation and maintenance rates used for the above
computations shall be the basis for requested variable operation and
maintenance rates in the utility's future rate cases.
(4) The
energy rate contained in the schedules shall include the savings attributable
to the avoidance of losses due to transmission, distribution, and
transformation as applicable for different voltage levels of interconnection. These transmission, distribution, and
transformation loss avoidance savings for different voltage levels of
interconnection shall be obtained from the utility's filing in the last
commission-decided rate case, and those figures shall be shown in the utility's
submittal.
D. Negotiations. Notwithstanding the provisions of 17.9.570
NMAC, a utility and qualifying facility may at the qualifying facility's option
negotiate rates for the power to be supplied by the qualifying facility. Such negotiated rates shall be filed with the
commission within 30 days of the execution of the contract. The contract shall not contain any rate which
is higher than the utility's avoided costs as defined in 17.9.570 NMAC.
[17.9.570.11 NMAC - Rp, 17.9.570.11 NMAC, 5/24/2022]
17.9.570.12 OBLIGATION TO SELL:
A. Rates
to be offered. Utilities are required to
provide supplementary power, backup power, maintenance power, and interruptible
power to qualifying facilities irrespective of whether the production and consumption
functions of the qualifying facility are singly or separately owned. The rates for supplementary power, backup
power, maintenance power, and interruptible power shall be calculated as
provided for in this section (17.9.570.12 NMAC) and included in the tariff for
each utility to be filed pursuant to 17.9.570 NMAC. Utilities may charge a facilities fee for
equipment dedicated to the customer pursuant to the utility's rate schedules
and rules governing the utility's practices for recovering such costs. The computation of the facilities fee shall take into account the costs of facilities already paid for
by the customer before installing a qualifying facility.
B. Supplementary
power.
(1) Qualifying
facilities shall be entitled to supplementary power under the same retail rate
schedules that would be applicable to those retail customers having power
requirements equal to the supplementary power requirements of the qualifying
facility. Any ratchet enforced through
the “billing demand” provisions of such retail schedules shall also apply.
(2) To
determine the amount of supplementary power required, supplementary power shall
be measured to each qualifying facility through appropriate metering devices
which are adequate to determine whether supplementary or backup power is being
utilized. The demand interval used shall
be the same as that contained in the applicable retail rate schedule.
C. Backup
power.
(1) Qualifying
facilities shall be entitled to backup power for forced outages under the same
retail rate which would be applicable absent its qualifying facility
generation. Rates for sale of backup
power shall not contain demand charges in time periods when demand charges are
not applicable to such retail rate schedule.
Rates for backup power shall not contain demand ratchets or power factor
penalties. If the utility can
demonstrate that a particular qualifying facility has caused either a demand
ratchet or a power factor penalty clause between the utility and its power
supplier(s) to be invoked because of the qualifying facility's operation, the
utility may petition the commission to allow the allocable charges resulting
from the demand ratchet or power f actor penalty which has been invoked to be
included in the rates for that particular qualifying
facility.
(2) In
the months that backup power is not utilized by the qualifying facility the
rates for backup power may contain a monthly reservation fee which shall not
exceed ten percent of the monthly demand charge contained in the retail rate
schedule which would be applicable to the consumer absent its qualifying
facility generation. Such a reservation
fee shall not be charged while a qualifying facility is taking backup power or
while charges resulting from a power factor penalty or demand ratchet have been
imposed pursuant to Paragraph (1) of Subsection C of 17.9.570.12 NMAC.
D. Maintenance
power.
(1) Maintenance
power shall be provided to qualifying facilities for periods of maintenance
scheduled in advance with the concurrence of' the utility. A qualifying facility shall schedule such
maintenance with the utility by giving the utility advance notice dependent on
the length of the outage as follows:
Length of
Outage* |
Advance
Notice* |
1 day |
5 days |
2 to 5 days |
30 days |
6 to 30 days |
90 days |
*All days are calendar days. |
(2) Maintenance
power rates shall be the same as the retail rate which would be applicable to
the qualifying facility absent its qualifying facility generation. The maintenance power demand charge shall be
determined by multiplying the applicable retail demand charge by the ratio of
the number of weekdays in which the maintenance power was taken to the number
of weekdays in the month. No demand
charge shall apply for maintenance power taken during off-peak hours as defined
in the utility's retail tariffs. For
those utilities which do not have time-of-use rates, off-peak hours are defined
as 11:00 p.m. to 7:00 a.m. weekdays, 24 hours per day on weekends and holidays.
(3) Maintenance
power shall be available to qualifying facilities for a minimum period of 30
days per year scheduled outside of the system peak period of the utility which
is defined as the three-month period covering the peak month together with the
preceding and succeeding months.
E. Interruptible
power. All utilities shall file rates
for interruptible power which shall be available to qualifying facilities. Rates for such interruptible power purchases
shall reflect the lower costs, if any, which the utility incurs in order to provide interruptible power as opposed to what
it would incur to provide firm power.
F. Customer
charges. The customer charges from a
utility for a qualifying facility shall be the same as the retail rate
applicable to the customers in the same rate class absent its qualifying
facility generation.
G. Exceptions. An electric utility shall not be required to
provide supplementary power, backup power, maintenance power, or interruptible
power to a qualifying facility if, after notice in the area served by the
electric utility and after opportunity for public comment, the electric utility
demonstrates and the commission finds that provision
of such power would:
(1) impair
the electric utility's ability to render adequate service to its customers; or
(2) place
an undue burden on the utility.
[17.9.570.10 NMAC - Rp, 17.9.570.10 NMAC, 5/24/2022]
17.9.570.13 PERIODS WHEN PURCHASES AND SALES ARE
NOT REQUIRED AND GENERAL PROVISIONS:
A. System
emergencies.
(1) During
any system emergency a utility may discontinue on a nondiscriminatory basis:
(a) purchases
from a qualifying facility if such purchases would contribute to such
emergency, and
(b) sales
to a qualifying facility provided that such discontinuance is on a previously
established nondiscriminatory basis.
(2) A
qualifying facility shall be required to provide power to a utility during a
system emergency only to the extent:
(a) provided
by agreement between the qualifying facility and the utility; or
(b) ordered
pursuant to the provisions of the Federal Power Act, 16 U.S.C. Section 824a(c).
B. Operational
circumstances. The utility may
discontinue purchases from the qualifying facility during any period in which,
due to operational circumstances, purchases from qualifying facilities will
result in costs greater than those which the utility would incur if it did not
make such purchases but instead generated an equivalent amount of energy
itself; a claim by an electric utility that such a period has occurred or will
occur is subject to verification by the commission; the utility shall maintain
and make available sufficient documentation to aid the commission with
verification proceedings.
C. Notification
requirements. Any utility which
disconnects and thereby discontinues purchases or sales from a qualifying
facility for the reasons cited in Subsections A and B of 17.9.570.13 NMAC above
shall notify the qualifying facility or facilities prior to the system
emergency or operational circumstance if reasonably possible. If prior notice is not reasonably possible
the utility shall notify the qualifying facility by telephone or personal
contact within 48 hours following the system emergency or operational
circumstance followed by written communication if requested by the qualifying
facility. Any notification shall include
the specific reason for the system emergency or operational circumstance.
D. Penalty. Any utility which fails to comply with the
notification requirements in Subsection C of 17.9.570.13 NMAC or fails to
demonstrate the existence of a system emergency or operational circumstance
which warrants the discontinuance of purchases shall pay for the qualifying
facility's imputed or expected power at the applicable rate as if the system
emergency or operational circumstance had not occurred. The utility may also be subject to a penalty
under Section 62-12-4 NMSA 1978.
E. Wheeling
of power. If the qualifying facility
agrees, an electric utility which would otherwise be obligated to purchase
power from the qualifying facility may transmit power to any other electric
utility. Any electric utility to which
power is transmitted shall purchase such power as if the qualifying facility
were supplying power directly to such electric utility. The rate for purchase by the electric utility
to which such power is transmitted shall be adjusted up or down to reflect line
losses pursuant to 18 C.F.R. Section 292.304(e)(4) and shall not include any
charges for transmission.
F. Distribution
cooperatives.
(1) A
distribution cooperative having a full power requirements
contract with its supplier has the option of transferring the purchase
obligation pursuant to 17.9.570.9 NMAC to its power supplier. The qualifying facility will be paid the
capacity and energy payments, as applicable, by the supplier pursuant to 17.9.570.11
NMAC. A distribution cooperative that
does not transfer the purchase obligation to its power supplier shall have the
option to:
(a) pay
qualifying facilities the energy and capacity charges including appropriate
fuel and purchase power pass-throughs it pays to its power supplier, or
(b) pay
the qualifying facility the energy and capacity charges which shall be
determined in accordance with Section 17.9.570.11 NMAC.
(2) The
obligation to interconnect and provide supplementary, backup, and maintenance
power either on a firm or on an interruptible basis shall remain with the
distribution cooperative.
(3) Any
municipal electric utility that does not have generating capacity but is
subject to the jurisdiction of the commission shall be considered a
distribution cooperative for the purposes of 17.9.570 NMAC.
G. Requirements
to file electric utility system data:
not later than April 1 of each year each utility shall submit to the
commission a report covering the previous calendar year which shall at a
minimum provide:
(1) the
name and address of each qualifying facility with which it is interconnected,
with which it has a contract to interconnect, or with which it has concluded a
wheeling agreement;
(2) annual
purchases in kW and kWh from each qualifying facility with which it is interconnected and the amount of electricity wheeled on
behalf of each qualifying facility;
(3) the
price charged for any power wheeled on behalf of each qualifying facility;
(4) the
methodology and assumptions used in the calculation of wheeling rates;
(5) amounts
actually paid to each qualifying facility; and
(6) a
list of all applications for interconnection which the utility has rejected or
otherwise failed to approve together with the reasons therefor.
H. Filing
of tariff.
(1) Within
60 days of the adoption of this rule, each utility shall develop and file any
changes to its tariffs on file with the commission needed to comply with the
requirements set forth herein; such changes shall comply with all tariff filing
requirements of the commission; such tariffs shall conform to the requirements
of 17.1.210 NMAC, and shall become effective 30 days after the filing thereof
unless suspended by the commission pursuant to Section 62-8-7 NMSA 1978, or
unless ordered effective at an earlier date by the commission.
(2) Within
60 days of the adoption of the amendments to this rule, each utility shall
develop and file tariffs for metering and billing consistent with this rule for
generating facilities with rated capacities up to and including 10 kW; such
tariffs shall comply with all tariff filing requirements of the commission;
such tariffs shall conform to the requirements 17.1.210 NMAC, and shall become
effective 30 days after the filing thereof unless suspended by the commission
pursuant to Section 62-8-7 NMSA 1978, or unless ordered effective at an earlier
date by the commission.
I. Complaints
and investigations. The procedures set
forth in Sections 62-8-7 and 62-10-1 NMSA 1978 and the complaint provisions of
1.2.2 NMAC shall be applicable for the resolution of complaints and
investigations arising out of the implementation and conduct of 17.9.570 NMAC.
J. Severability. If any part of 17.9.570 NMAC or any
application thereof is held invalid, the remainder or the application thereof
to other situations or persons shall not be affected.
K. Amendment. The adoption of 17.9.570 NMAC shall in no way
preclude the commission, after notice and hearing, from altering or amending
any provision hereof or from making any modification with respect to its
application deemed necessary.
L. Exemption
or variance.
(1) Any
interested person may file an application for an exemption or a variance from
the requirements of 17.9.570 NMAC. Such
application shall:
(a) describe
the situation which necessitates the exemption or variance;
(b) set
out the effect of complying with 17.9.570 NMAC on the utility and its customers
if the exemption or variance is not granted;
(c) identify
the section(s) of 17.9.570 NMAC for which the exemption or variance is requested;
(d) define
the result which the request will have if granted;
(e) state
how the exemption or variance will promote the achievement of the purposes of
17.9.570 NMAC; and
(f) state
why no other reasonable alternative is available.
(2) If
the commission determines that the exemption or variance is consistent with the
purposes of the rule as defined herein, the exemption or variance may be
granted. The commission may at its
option require an informal conference or formal evidentiary hearing prior to
the granting of the variance.
M. Motion
for stay pending amendment, exemption, or variance. An application for an amendment, exemption,
or a variance may include a motion that the commission stay the application of
the affected portion of 17.9.570 NMAC for the transaction specified in the
motion.
[17.9.570.13 NMAC - Rp, 17.9.570.13 NMAC, 5/24/2022]
17.9.570.14 NET
METERING OF CUSTOMER-SITED QUALIFYING FACILITIES WITH A DESIGN CAPACITY UP TO
AND INCLUDING 10KW:
A. Relationship to other commission
rules. The standards and procedures for
the interconnection of qualifying facilities subject to this section
(17.9.570.14 NMAC) are set forth in 17.9.568 NMAC.
B. Use of a single meter. When the
customer is billed under a rate structure that does not include time-of-use
energy pricing, a single energy meter shall be used to implement net metering of
a qualifying facility unless an alternate metering arrangement is agreed to by
the customer and utility. If either the
utility or the customer requests an alternate form of metering or additional
metering that is not required to accomplish net metering or is for the
convenience of the party, the party requesting the change in metering shall pay
for the alternate or additional metering arrangement. If the customer elects to take electric
service under any rate structure, including time-of-use, that requires the use
of metering apparatus or a metering arrangement that is more costly than would
otherwise be necessary absent the requirement for net metering, the customer
shall be required to pay the additional incremental cost of the required
metering equipment. Within ten days of
receiving notification from the customer of the intent to interconnect, the
utility will notify the customer of any metering costs. Charges for special metering costs shall be
paid by the customer, or arrangements for payment agreed to between the
customer and utility, prior to the utility authorizing interconnected
operation.
C. Net metering calculation. The utility shall calculate each customer’s
bill for the billing period using net metering and with the following
conditions:
(1) Customers
shall be billed for service in accordance with the rate structure and monthly
charges that the customer would be assigned if the customer had not
interconnected a qualifying facility. Net energy produced or consumed on a monthly basis shall be measured in accordance with
standard metering practices.
(2) If
electricity supplied by the utility exceeds electricity generated by the
customer during a billing period, the customer shall be billed for the net
energy supplied by the utility under the applicable rates.
(3) If
electricity generated by the customer exceeds the electricity supplied by the
grid during a billing period, the utility shall credit the customer on the next
bill for the excess kilowatt-hours generated, by:
(a) crediting
or paying the customer for the net energy supplied to the utility at the
utility's energy rate pursuant to this 17.9.570 NMAC; or
(b) crediting
the customer for the net kilowatt-hours of energy supplied to the utility.
Unused credits shall be carried forward from month to month; provided that if a
utility opts to credit customers and the customer leaves the system, customer's
unused credits for excess kilowatt-hours generated shall be paid to the
customer at the utility's energy rate pursuant to this 17.9.570 NMAC.
[17.9.570.14 NMAC - Rp, 17.9.570.14 NMAC, 5/24/2022]
17.9.570.15 STANDARD METERING AND BILLING
AGREEMENT FOR QUALIFYING FACILITIES WITH A DESIGN CAPACITY OF GREATER THAN 10
KW AND LESS THAN OR EQUAL TO 10 MW:
This
agreement is made as of the_____ day of _____, 20____, by and between _________
("customer") and____________ (“utility”) also referred to
collectively as "parties" and singularly as "party." Customer receives electric service from
utility at __________________ (location/address) under account
__________________. Customer has located
at these premises a qualifying facility ("QF") as defined by 17.9.570
NMAC, having an installed capacity of greater than 10 kilowatts and up to and
including 10 megawatts, which is interconnected to utility pursuant to an
interconnection agreement, attached as exhibit A. For good and valuable consideration, customer
desires to sell or provide electricity to utility from the QF and utility
desires to purchase or accept all the energy produced by the QF that is not
consumed by customer, and the parties agree to the following terms and
conditions:
A. DEFINITIONS. Whenever used in the agreement, the following words and phrases shall have the
following meanings:
(1) agreement shall mean this agreement and
all schedules, tariffs, attachments, exhibits, and appendices attached hereto
and incorporated herein by reference;
(2) interconnection facilities shall mean
all machinery, equipment, and fixtures required to be installed solely to interconnect
and deliver power from the QF to the utility's system, including, but not
limited to, connection, transformation, switching, metering, relaying, line and
safety equipment and shall include all necessary additions to, and
reinforcements of, the utility's system;
(3) prudent electrical practices shall mean
those practices, methods and equipment, as changed from time to time, that are
commonly used in prudent electrical engineering and operations to operate
electric equipment lawfully, and with safety, dependability, efficiency and economy;
(4) qualifying facility (QF) means a
cogeneration facility or a small power production facility which meets the
criteria for qualification contained in 18 C.F.R. Section 292.203;
(5) point of delivery means the
geographical and physical location described on exhibit B hereto; such exhibit
depicts the location of the QF’s side of interconnection facilities where
customer is to (sell and) deliver electric energy pursuant to this agreement or
pursuant to a separate wheeling agreement;
(6) termination means termination of this
agreement and the rights and obligations of the parties under this agreement,
except as otherwise provided for in this agreement;
(7) suspension means suspension of the
obligation of the utility to interconnect with and purchase electricity from
the customer.
B. TERM OF AGREEMENT. The original term of this agreement shall be
for a period of five years from the
date of the execution of this agreement and shall continue thereafter from year
to year until terminated as herein provided.
(1) Termination
by customer. Termination of this
agreement during and after the original term requires written notice to utility
that this agreement will terminate in 90 days.
Customer may terminate this agreement without showing good cause.
(2) Termination
by utility. Termination of this
agreement during and after the original term requires written notice to
customer that this agreement will terminate in 90 days, unless otherwise
provided. utility, in the exercise of
this right, must show good cause for the termination.
(3) At
any time the QF is sold, leased, assigned, or
otherwise transferred, the seller or lessor of the QF shall notify utility and
this agreement may be terminated at utility's option, for good cause,
regardless of whether such transfer occurs during the original term or any
renewal thereof. Such termination may be
made with five days written notice by utility.
(4) Should
the customer default in the performance of any of the customer's obligations
hereunder, utility may suspend interconnection, purchases, or both and if the
default continues for more than 90 days after written notice by utility to customer,
utility may terminate this agreement.
Termination or suspension shall not affect the obligation of utility to
pay for energy already delivered or of customer to reimburse interconnection
costs, or any cost then accrued. Upon
termination, all amounts owed to the utility will become payable immediately.
C. METER INSTALLATION, TESTING AND ACCESS TO
PREMISES. Customer will be metered
by a meter or meters as determined by utility to which utility is granted
reasonable access.
(1) Customer
shall supply, at its own expense, a suitable location for all meters and
associated equipment. Customer shall
provide a clearly understandable sketch or one-line diagram showing the
qualifying facility, the interconnection equipment, breaker panel(s),
disconnect switches and metering, to be attached to this agreement. Such location must conform to utility’s meter
location policy. The following metering
options will be offered by utility: _________________. Customer shall provide and install a meter
socket and any related interconnection equipment per utility's requirements.
(2) Customer
shall deliver the as-available energy to utility at utility's meter.
(3) Utility
shall furnish and install a standard kilowatt-hour meter. Utility may install, at its option and
expense, magnetic tape recorders in order to obtain
load research information. Utility may
meter the customer's usage using two meters for measurement of energy flows in
each direction at the point of delivery.
(4) If
either utility or customer requests an alternate form of metering or additional
metering that is not required to accomplish net metering or is for the
convenience of the party, the party requesting the change in metering shall pay
for the alternate or additional metering arrangement. If customer elects to take electric service
under any rate structure, including time-of-use, that requires the use of
metering apparatus or a metering arrangement that is more costly than would
otherwise be necessary absent the requirement for net metering, customer shall
be required to pay the additional incremental cost of the required metering
equipment. Within 10 days of receiving notification
from customer of the intent to interconnect, utility will notify the customer
of any metering costs. Charges for
special metering costs shall be paid by customer, or arrangements for payment
agreed to between customer and utility, prior to utility authorizing
interconnected operation.
(5) All
meter standards and testing shall be in compliance with
utility’s rules and regulations as approved by the NMPRC. The metering configuration shall be one of
utility’s standard metering configurations as set out in Subsection D of
17.9.570.15 NMAC and mutually agreeable to the parties or any other metering
configuration mutually agreeable to the parties. The agreed upon configuration is shown on
exhibit B. (Service by the distribution
cooperative to customer shall be in accordance with the distribution
cooperative's articles, bylaws and regulations and in
accordance with its tariffs filed with the NMPRC, the terms and conditions of
which shall be unaffected by this agreement).
If the interconnection facilities have been modified pursuant to the
interconnection agreement, customer shall permit utility, at any time, to
install or modify any equipment, facility or apparatus
necessary to protect the safety of its employees or to assure the accuracy of
its metering equipment, the cost of which shall be borne by customer. Utility shall have the right to disconnect
the QF if it has been modified without utility’s authorization.
(6) Utility
may enter customer's premises to inspect at all reasonable hours customer's
protective devices and read or test meter; and pursuant to the interconnection
agreement to disconnect, without notice, the interconnection facilities if
utility reasonably believes a hazardous condition exists and such immediate
action is necessary to protect persons, or utility's facilities, or property of
others from damage or interference caused by customer's facilities, or lack of
properly operating protective devices.
D. ENERGY PURCHASE PRICE AND METERING OPTION. All electric
energy delivered and service rendered hereunder shall
be delivered and rendered in accordance with the applicable rate schedules and
tariffs. Customer has selected the
__________ metering option defined in this section. It is understood and agreed, however, that
said rates are expressly subject to change by any regulatory body having
jurisdiction over the subject matter of this agreement. If a new rate schedule or tariff is approved
by the proper regulatory body, the new rate schedule or tariff shall be
applicable to this agreement upon the effective date of such rate schedule or
tariff.
(1) Load
displacement option: Utility will
interconnect with the customer using a single meter which will be ratcheted and
would only measure the flow of energy to the customer. Billing to customer will be at utility’s
approved tariff rate applicable to the service provided to the QF. There will be no additional customer charge
and no payment by utility for any excess power which might be generated by the
QF.
(2) Net
metering option.
(a) Utility
shall install the metering necessary to determine the net energy delivered from
customer to utility or the net energy delivered from utility to customer for
each time-of-use or single rate period, as applicable, during a billing period. The net energy delivered to either the QF or
to the utility is the difference between the energy produced by the QF
generation and the energy that would have otherwise been supplied by the
utility to the QF absent the QF generation.
(b) The
net energy delivered from customer to utility shall be purchased by utility at
utility’s applicable time-of-use or single period energy rate, as described in
Subsection B of 17.9.570.11 NMAC, and filed with the NMPRC. Customer shall be billed for all net energy
delivered from utility in accordance with the tariff that is applicable to
customer absent the QF generation. An
additional customer charge to cover the added costs of billing and
administration may be included in the tariff.
At the end of the billing period, utility shall net all charges owed to
utility by customer and all payments owed by utility to customer. If a net amount is owed to customer for the
billing period, and is less than $50, the payment amount may be carried over to
the following billing period. If a net
amount is owed to customer and is $50 or more, utility shall make payment to
customer prior to the end of the next billing period.
(c) If
provision of the net metering option requires metering equipment and related
facilities that are more costly than would otherwise be necessary absent the
requirement for net metering, customer shall pay all incremental costs
associated with installing the more costly metering equipment and facilities.
(3) Simultaneous
buy/sell option.
(a) Utility
will install the metering necessary to determine separately 1) all of the energy produced by customer’s generator and 2)
all of the power consumed by customer’s loads.
Utility will purchase all energy produced at utility’s applicable
time-of-use or single period energy rate, as described in Subsection B of
17.9.570.11 NMAC, for such purchases, and as filed with and approved by the
NMPRC. Customer shall purchase all power
consumed at its normally applicable tariff rate. An additional customer charge to cover the
added costs of billing and administration may be included.
(b) If
provision of the simultaneous buy/sell option requires metering equipment and
related facilities that are more costly than would otherwise be necessary
absent the requirement for simultaneous buy/sell metering, customer shall pay
all incremental costs associated with installing the more costly metering
equipment and facilities.
E. INTERRUPTION OR REDUCTION OF DELIVERIES.
(1) Utility
shall not be obligated to accept or pay for and may require customer to
interrupt or reduce deliveries of available energy under the following
circumstances:
(a) it is necessary in order to construct,
install, maintain, repair, replace, remove, investigate, or inspect any of its
equipment or part of its system or if it reasonably determines that
curtailment, interruption, or reduction is necessary because of emergencies,
forced outages, force majeure, or compliance with prudent electrical practices;
whenever possible, utility shall give customer reasonable notice of the
possibility that interruption or reduction of deliveries may be required;
(b) there
is evidence that customer's QF is interfering with service to other customers
or interfering with the operation of utility’s equipment; customer may be
reconnected by utility when customer makes the necessary changes to comply with
the standards required by this agreement;
(c) it
is necessary to assure safety of utility’s personnel; notwithstanding any other
provision of this agreement, if at any time utility reasonably determines that
the facility may endanger utility personnel or other persons or property or the
continued operation of customer's facility may endanger the integrity or safety
of utility's electric system, utility shall have the right to disconnect and
lock out customer's facility from utility's electric system; customer's
facility shall remain disconnected until such time as utility is reasonably
satisfied that the conditions referenced in this section have been corrected;
(d) there
is a failure of customer to adhere to this agreement;
(e) if
suspension of service is otherwise necessary and allowed under utility’s rules
and regulations as approved by the NMPRC.
(2) Customer
shall cooperate with load management plans and techniques as ordered or
approved by the NMPRC, and the service to be furnished by utility hereunder may
be modified as required to conform thereto.
F. FORCE MAJEURE. Force
majeure shall mean any cause beyond the control of the party affected,
including, but not limited to, failure of or threat of failure of facilities,
flood, earthquake, tornado, storm, fire, lightning, epidemic, war, riot, civil
disturbance or disobedience, (labor dispute,) labor or material shortage,
sabotage, restraint by court order or public authority, and action or
nonaction, by or failure to obtain the necessary authorizations or approvals
from any governmental agency or authority, which by exercise of due diligence
such party could not reasonably have been expected to avoid and which by
exercise of due diligence, it shall be unable to overcome. If either party, because of force majeure, is
rendered wholly or partly unable to perform its obligations under this
agreement, except for the obligation to make payments of money, that party
shall be excused from whatever performance is affected by the force majeure to
the extent so affected, provided that:
(1) the
nonperforming party, within a reasonable time after the occurrence of the force
majeure, gives the other party written notice describing the particulars of the
occurrence;
(2) the
suspension of performance is of no greater scope and of no longer duration than
is required by the force majeure; and
(3) the
nonperforming party uses its best efforts to remedy its inability to
perform. This paragraph shall not
require the settlement of any strike, walkout, lockout
or other labor dispute on terms which, in the sole judgment of the party
involved in the dispute, are contrary to its interest. It is understood and agreed that the
settlement of strikes, walkouts, lockouts or other
labor disputes shall be entirely within the discretion of the party involved in
the disputes.
G. INDEMNITY. Each party shall indemnify the other from
liability, loss, costs, and expenses on account of death or injury to persons
or damage or destruction of property occasioned by the negligence of the
indemnifying party or its agents, officers, employees, contractors, licensees
or invitees, or any combination thereof, except to the extent that such death,
injury, damage, or destruction resulted from the negligence of the other party
or its agents, officers, employees, contractors, licensees or invitees, or any
combination thereof. Provided, however,
that:
(1) each
party shall be solely responsible for the claims or any payments to any
employee or agent for injuries occurring in connection with their employment or
arising out of any workers compensation law or occupational disease disablement
law;
(2) utility
shall not be liable for any loss of earnings, revenues, indirect or
consequential damages or injury which may occur to customer as a result of
interruption or partial interruption (single-phasing)
in delivery of service hereunder to customer or by failure to receive service
from customer by reason of any cause whatsoever, including negligence; and
(3) the
provisions of this subsection on indemnification shall not be construed so as
to relieve any insurer of its obligation to pay any insurance proceeds in
accordance with the terms and conditions of any valid insurance policy;
(4) the
indemnifying party shall pay all costs and expenses incurred by the other party
in enforcing the indemnity under this agreement including reasonable attorney
fees.
H. DEDICATION. An undertaking by one party to another party
under any provision of this agreement shall not constitute the dedication of
such party's system or any portion thereof to the public or to the other party
and any such undertaking shall cease upon termination of the party's
obligations herein.
I. STATUS OF CUSTOMER. In performing under this agreement, customer
shall operate as or have the status of an independent contractor and shall not
act as or be an agent, servant, or employee of utility.
J. AMENDMENT, MODIFICATIONS OR WAIVER. Any amendments or modifications to this
agreement shall be in writing and agreed to by both parties. The failure of any party at any time or times
to require performance of any provision hereof shall in no manner affect the
right at a later time to enforce the same. No waiver by any party of the breach of any
term or covenant contained in this agreement, whether by conduct or otherwise,
shall be deemed to be construed as a further or continuing waiver of any such breach
or a waiver of the breach of any other term or covenant unless such waiver is
in writing.
K. ASSIGNMENT. This agreement and all provisions hereof
shall inure to and be binding upon the respective parties hereto, their
personal representatives, heirs, successors, and assigns. Customer shall not assign this agreement or
any part hereof without the prior written consent of utility, otherwise this
agreement may be terminated pursuant to Paragraph (3) of Subsection B of
17.9.570.15 NMAC
L.
NOTICES. Any payments, notices, demands or requests
required or authorized by this agreement shall be deemed properly given if
personally delivered or mailed postage prepaid to:
Customer:
____________________________________________
Utility:
______________________________________________
The designation of the persons to be notified, or the
address thereof, may be changed by notice in writing by one party to the
other. Routine notices and notices
during system emergency or operational circumstances may be made in person or
by telephone. Customer’s notices to
utility pursuant to this agreement shall refer to the customer's electric
service account number set forth in this agreement.
M. MISCELLANEOUS. This agreement and any amendments thereto,
including any tariffs made a part hereof, shall at all times
be subject to such changes or modifications as shall be ordered from time to
time by any regulatory body or court having jurisdiction to require such
changes or modification. This agreement
(and any tariffs incorporated herein) contains all the agreements and
representations of the parties relating to the interconnection and purchases
contemplated and no other agreement, warranties, understandings
or representations relating thereto shall be binding unless set forth in
writing as an amendment hereto.
N. GOVERNING LAW. This agreement shall be
interpreted, governed, and construed under the laws of the state of New Mexico
as if executed and to be performed wholly within the state of New Mexico.
O. ATTACHMENTS. This agreement includes
the following exhibits as labeled and incorporated herein by reference:
(1) interconnection
agreement;
(2) customer's
sketch or one line diagram and site drawing, and generation and protection
equipment specifications.
In witness thereof, the parties have executed this
agreement on the date set forth herein above.
Date:__________
CUSTOMER__________By:__________.
Date: __________
UTILITY ________By:__________.
[17.9.570.15 NMAC - Rp, 17.9.570.15 NMAC, 5/24/2022]
HISTORY OF
17.9.570 NMAC:
Pre-NMAC
History: The material in this part was derived from
that previously filed with the commission of public records-state records
center and archives.
PSC-GO 37 (General Order 37), Rules And
Regulations Governing Cogeneration And Small Power Production filed 4/1/1981.
First Revised General Order No. 37, Rules And Regulations Governing Cogeneration And Small Power
Production filed 12/30/1982.
G.O. 37; General Order 37, Second Revised, Rules And Regulations Governing Cogeneration And Small Power
Production filed 12/3/1986.
G.O. 37; General Order 37, Second Revised, Rules And Regulations Governing Cogeneration And Small Power
Production filed 1/5/1987.
G.O. 37; Second Revised General Order 37, Governing
Cogeneration And Small Power Production filed 3/3/1987.
G.O. 37; Third Revised General Order 37, Governing
Cogeneration And Small Power Production filed 3/11/1988.
NMSPC Rule 570, Governing Cogeneration And Small Power Production filed 6/30/1988.
History of
Repealed Material:
NMPSC Rule 570, Governing Cogeneration and Small Power
Production (filed 6/30/1988) repealed 3/30/2007.
17 NMAC 10.571, Net Metering of Customer-Owned
Qualifying Facilities of 10kW or Smaller (filed 9/17/1999) repealed 10/15/2008.
17.9.570 NMAC, Governing Cogeneration and Small Power
Production (filed 3/6/2007) repealed 10/15/2008.
17.9.570 NMAC, Governing Cogeneration and Small Power
Production (filed 10/1/2008) repealed 5/24/2022.
Other
History:
NMPSC Rule 570, Governing Cogeneration and Small Power
Production (filed 6/30/1988) was renumbered, reformatted
and replaced by 17.9.570 NMAC, Governing Cogeneration and Small Power
Production, effective 3/30/2007.
Only those applicable portions of 17 NMAC 10.571, Net
Metering of Customer-Owned Qualifying Facilities of 10kW or Smaller (filed
09/17/1999) and 17.9.570 NMAC, Governing Cogeneration and Small Power
Production (filed 3/16/2007) were replaced by 17.9.570 NMAC, Governing
Cogeneration and Small Power Production, effective 10/15/2008.